www.protekdevices.com 1 30kpa30a thru 30kpa280a power tvs component applications ? relay drives ? motor (start/stop) back emf protection ? module lightning protection iec compatibility (en61000-4) ? 61000-4-5 (surge): 8/20s - 95a, l4 (line-gnd), 167a, l3 (power) & 48a, l4 (line-line) fea tures ? 30,000 watts peak pulse power per line (10/1000s) ? unidirectional & bidirectional configurations ? easy mounting to printed circuit boards ? available in voltage types ranging from: 30v to 280v mechanical characteristics ? molded case ? weight 2.5 grams (approximate) ? flammability rating ul 94v-0 ? positive terminal marked with band - unidirectional devices ? marking: logo & part number axial lead 05113.r7 9/02 applica tion v cc typical relay drive protection 05113 . . . engineered solutions for the transient environment?
2 www.protekdevices.com 05113.r7 9/02 30kpa30a thru 30kpa280a device characteristics maximum ratings @ 25c unless otherwise specified peak pulse power dissipation (t p =10/1000s) - see fig. 1 forward surge rating (1/20 seconds) - see note 2 symbol value amps 200 watts units 30,000 i f p pp parameter electrical characteristics pa r t number (notes 1 & 2) rated stand-off voltage v wm volts breakdown voltage maximum clamping voltage (see fig. 2) @ 10/1000s v c @ i pp temperature coefficient of v (br) v (br) mv/c 30kpa30a 30KPA36A 30kpa43a 30kpa48a 30kpa64a 30kpa70a 30kpa75a 30kpa90a 30kpa160a 30kpa180a 30kpa260a 30kpa280a 30.0 36.0 43.0 48.0 64.0 70.0 75.0 90.0 160.0 180.0 260.0 280.0 33.3 40.0 47.8 53.3 71.1 77.8 83.3 100.0 178.0 200.0 289.0 311.0 55.2v @ 543.0a 61.8v @ 485.0a 73.0v @ 410.0a 77.4v @ 388.0a 104.0v @ 294.0a 109.0v @ 274.0a 119.4v @ 251.0a 147.0v @ 206.0a 252.6v @ 119.0a 291 @ 104a 416.0v @ 72.0a 464.0v @ 65.0a 5000 2000 1000 250 10 10 10 10 10 10 10 10 maximum leakage current @v wm i d a 34 41 50 56 76 83 89 109 195 230 317 342 note 1: part numbers shown are unidirectional devices. add a ?ca? suffix to specify bidirectional devices, such as 30kpa30 ca. devices shown are preferred voltages. contact factory for additional voltages. note 2: v f = 15 volts @ 200a, 8.3ms (1/2 sine wave) - unidirectional devices only . min v (br) volts @i t ma 50 50 50 5 5 5 5 5 5 5 5 5 1.0 watts p d steady state power dissipation -55 to +150 0 c storage temperature -55 to +150 0 c t j operating temperature t stg
3 www.protekdevices.com 05113.r7 9/02 30kpa30a thru 30kpa280a graphs 0 1 2 3 t - time - ms 0 50 100 i pp - peak pulse current - % of i pp test waveform parameters t f = 10s t d = 1,000s t f peak value i pp e -t figure 2 pulse wave form t d = t i pp /2 0 25 50 75 100 125 150 t l - lead temperature - c 20 40 60 80 100 % of rated power peak pulse power 10/1000s average power figure 3 power derating curve 0 0.1 1 10 100 1,000 10,000 100,000 t d - pulse duration - s 0 10 100 1,000 p pp - peak pulse power - kilowatts figure 1 peak pulse power vs pulse time 30kw 10/1000s waveform
4 www.protekdevices.com 05113.r7 9/02 30kpa30a thru 30kpa280a copyright ? protek devices 2002 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the selection or specifications of such products. package outline & dimensions protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www.protekdevices.com 06028 rev 0 - 12/01 notes: 1. dimensions are exclusive of mold flash and metal burrs. a b c d e - 9.10 - 1.30 dia 9.10 1.00 0.34 1.00 0.048 dia 0.34 - 0.36 - 0.052 dia 0.36 24.5 8.60 24.5 1.20 dia 8.60 dim min max min max millimeters inches package dimensions package outline 30kpa a b e d c
|
